DK Digital CDB-700 Bedienungsanleitung PDF herunterladen (Seite 89)

Page 89 of 108

The EBC is designed for use together with 3

party castors and the LINAK OpenBus™

control system, including Jumbo Care. The EBC - Electronic brake control - can replace

traditional (mechanical) central locking systems for castors on hospital and nursing home

beds or medical applications like e.g. shower equipment. This new system offers an

increased freedom of application design as there is no need for a mechanical connection

between the castors.

4. EBC - Electronic Brake Control System (MEDLINE

CARELINE

)

Usage:

• Operating temperature: 5°C to 40°C

• Storage temperature: - 10°C to 50°C

• Approved according to IEC60601-1:2005 3

edition approved, ANSI / AAMI ES60601-1:2005, 3

edition, and CAN / CSA-22.2 No 60601-1:2008

Recommendations:

• Always use locking mechanism and O-ring on cables.

• If any open sockets they must be ﬁtted with blind plugs to ensure IP Degree.

• Removing or adding any OpenBus™ cables is not allowed when the control box is powered (hot plugging).

Before installation/service

• Stop the application.

• Remove battery power cable and OpenBus™ connection then possible castor connection.

• Service system.

After installation/service

• Reconnect castor connection, then OpenBus™ connection, battery power cable, then control box mains.

LINAK A/S only delivers the OpenBus™ system and is not responsible for any products other than LINAK products (i.e. products from 3

party suppliers or the compliance of such products with the LINAK OpenBus™ system).

...to be continued

The massage motor can be added to all kinds of couches and tables, chairs or

beds for treatment and examination. It enables comfort, relaxation and tension

release for patients and clients. The massage motors are directly connected to the

actuator port at the control box – no extra wiring at the application, simple and

easy mounting.

5. Massage Motor Medical (MEDLINE

CARELINE

)

Usage:

• Compatibility: CB6S OBMe, CB16 OBF, (CB20 pending) MJB006-0x to be used for OpenBus™ impulse drive

• Duty cycle: 10 %, 30 min. max.

• Operating temperature: +5°C to +40°C

• Storage temperature: -10°C to +50°C

• Relative humidity: 20 % to 80 % at +30°C

• Atmospheric pressure: 700 to 1060 hPa

• Approvals: Medical approvals to be determined

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 107 108

Kommentare zu diesen Handbüchern

Keine Kommentare

DK Digital CDB-700 Bedienungsanleitung Seite 89

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein DK Digital CDB-700