DK Digital CDB-700 Bedienungsanleitung PDF herunterladen (Seite 85)

Page 85 of 108

4. CBJ Home (MEDLINE

CARELINE

)

The CBJ Home is a specially developed solution for patient lifts. The complete

system consists of a control box and a battery enclosed in a single elegant

module.

The system will be medically approved and contains a series of features

ensuring a safe comfortable lift, e.g.the CBJ Home is equipped with a

soft-start function, emergency lowering, emergency stop etc. The CBJ Home-

batteries are ventilated through a number of grill units on the backside of

the housing.

Usage:

• CBJ Home is only compatible with LA31, LA34 (not fast motor) and LA44 (not fast motor) on channel1 (Hi/Lo) and LA31 on channel 2 (leg spreader).

• Duty cycle: Max. 10% or 2 min. continuous use then 18 min. without use.

• Ambient temperature: +5˚ to +40˚C.

• Approvals: IEC60601-1:2005 3

edition, ANSI/AAMI ES60601-1:2005 3

edition

Replacement of battery:

Only an authorised LINAK service centre should change a battery in a CBJ Home.

If a CBJ Home is opened and a battery changed by an unauthorised personel

there is a risk that it may malfunction at a later date.

Mounting of CBJ Home

(only vertically)

Recommendations:

• If emergency stop is pressed whilst charging, the batteries will not be charged.

• When charging, the CBJ Home will not be able to operate any actuators.

• For recharging the batteries, use charger CH01 (charger has to be ordered separately). Mains cable must be ordered separately if internal charger

is chosen.

• Note: Always mount the CBJ Home with the channel sockets facing downwards

• The CBJ Home is not intended for use with “buffer” type actuators such as LA28 and LA32 – only LA31, LA34 and LA44.

• The actuator must always be ﬁtted with an exchangeable cable (mini-ﬁt) socket.

• Actuators on channel 1 must always be with spline.

• It cannot be guaranteed that the actuator will stop exactly at the weight that is stored as the motors in the actuators will use less current when

run in. Though it will never reach the 1.5 times max. load as the norm states.

• Tolerance for current cut off is: +/-10%

• The maximum cut-off value that can be registered (stored) is 8 Amp.

• If an actuator or CBJ Home is exchanged it will be necessary to reset the max. load to ensure the correct cut-off value for the new system as a whole.

• The registration function can only be activated by using a specially produced handset (HB7X161-00). A standard handset cannot activate the function.

• To operate the “Learn mode” function in External charger versions produced before February 2010 press the “R” button when “learning” (the

lifting arm actuator will operate automatically). With all other versions (and future versions with external charger) both the “R” button and the

“lifting arm” button need to be pressed.

Warning!

In order to avoid injury, the emergency stop should be activated in (all) transport situations.

When using the control box with emergency stop button, the stop button must be released before charging batteries or before the application is put

into operation.

The mounting screws for the control box and the charger must be tightened with a maximum torque of 1 Nm.

Mounting information:

The CBJ Home is mounted by means of 2 screws:

Type ISO4762-M6x90-8.8 ( not supplied by LINAK )

Spares information:

The cable lock kit consists of the following 3 items:

• 2 x screws

• 1 x blind plug for ch. 2 if not in use

• Cable Lock

All the cable lock items are included when ordering the kit, article number: 0898001-B.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 107 108

Kommentare zu diesen Handbüchern

Keine Kommentare

DK Digital CDB-700 Bedienungsanleitung Seite 85

Kommentare zu diesen Handbüchern

Shoprider Roller Benutzerhandbücher

DK Digital CDB-700 Bedienungsanleitung Seite 85

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein DK Digital CDB-700

Shoprider Roller Benutzerhandbücher