DK Digital CDB-600 Spezifikationen PDF herunterladen (Seite 56)

Appendix A Hardware Specifications. PRELIMINARY Release MSD Software Manual.

A.1.7 2 Channel Analogue Output module.

Type Number: MSD600M-Output/1

Description: Output module with 2 analogue audio output and 1 AES3 output.

Supported by: MSD600M, MSD600M++, PT0600M, PT0660M, PT0660M-LS

Analogue Outputs:

Maximum output level: more than +18 dBm at 600 ohm

Sample rate with internal sync: 48 kHz

Sample rate range with external sync: 32 kHz to 50 kHz

Bit resolution: 24 bits

Frequency range within ±0.3 dB: 30 Hz to 20 kHz

Passband ripple: ±0,007 dB

Group delay: less than 0.21 msec

Dynamic range, A-weighted: more than 101 dB

Crosstalk at 1 kHz: less than –96 dB

Signal-to-noise ratio: typical 93 dB

Nominal output impedance: less than 5 ohm

Possible placement: Priority A

, Input slot #1, #2, #3 and #4.

Modules with higher priority must be placed in output slots with a lower number, starting with output slot #1.

Modules with the same priority can be interchanged.

Connector type: 15 Pin Female D-Sub.

Pin Configuration:

Page 52 of 64 PRELIMINARY Release

View from solder side of the 15 pin

MALE D-Sub connector.

Signal Name. Pin number.

Analogue Channel 1 Hot 15

Cold 8

Ground 7

Analogue Channel 2 Hot 14

Cold 6

Ground 13

AES-3 Hot 9

Cold 2

Ground 1

Ground 4

Ground 10

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 67 68

Keine Kommentare

DK Digital CDB-600 Spezifikationen Seite 56